|
Post by xcaptbill on May 20, 2010 13:03:21 GMT -6
I'm considering rebuilding my Victor Exhibition Reproducer. I have seen instructions that show the basic steps, but what about replacement parts such as the mica diaphragm, the rubber gasket material and the rubber flanges? Where would one acquire these items?
Any advice is appreciated.
|
|
|
Post by xcaptbill on May 21, 2010 9:01:28 GMT -6
|
|
Covah
Two Spring Motor
Posts: 92
|
Post by Covah on Jun 25, 2010 23:13:58 GMT -6
Be sure to buy your Exhibition isolators from Rocky Mountain Rubber Manufacturing. There is an enormous difference between them and say APSCO but only a few dollars in price. Buy them in bulk from RMRM to save on shipping. They require you to send them the inner ring around which they form the isolator. If you need a ring send me a PM.
The isolator at the above site phonographs.org is junk.
|
|
|
Post by xcaptbill on Jul 6, 2010 9:27:43 GMT -6
Thanks for the heads up!
|
|
gerald
Three Spring Motor
Posts: 222
|
Post by gerald on Feb 19, 2011 19:46:16 GMT -6
Ron Sitko and Wyatt's Musical Americana sell parts for a fraction of the cost of the supplier in the mentioned web site. Jerry B.
|
|